Jan  1 10:00:10 NTC-6000 syslog.info syslogd started: BusyBox v1.19.3
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000] Linux version 2.6.34.4 (ryan@darkstar) (gcc version 4.3.4 (crosstool-NG-1.7.1) ) #1 Wed Jul 25 10:36:56 EST 2012
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] CPU: VIVT data cache, VIVT instruction cache
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] Machine: Atmel AT91SAM9x - Bovine
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] Memory policy: ECC disabled, Data cache writeback
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.000000] On node 0 totalpages: 8192
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c038620c, node_mem_map c03bd000
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.000000]   Normal zone: 64 pages used for memmap
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.000000]   Normal zone: 8128 pages, LIFO batch:0
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] MainClk: 16000000
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] Clocks: CPU 396 MHz, master 132 MHz, main 16.000 MHz
Jan  1 10:00:10 NTC-6000 daemon.info init: starting pid 827, tty '/dev/ttyS0': '/sbin/getty -L ttyS0 115200 vt100'
Jan  1 10:00:10 NTC-6000 daemon.info supervisor: starting, reboot=1, log=/opt/supervisor.log
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jan  1 10:00:10 NTC-6000 daemon.debug supervisor: Opened log pipe.
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000] Kernel command line: mem=32M console=ttyS0,115200 root=mtd:root user_debug=31 rootfstype=jffs2 rw mtdparts=at91_nand:0x00100000(S1S2EN),0x00400000(rkern),0x00b00000(rfs),0x00400000(kernel),0x02020000(root),0x04c6
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] Memory: 32MB = 32MB total
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000] Memory: 28652k/28652k available, 4116k reserved, 0K highmem
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000] Virtual kernel memory layout:
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     vmalloc : 0xc2800000 - 0xfee00000   ( 966 MB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xc2000000   (  32 MB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]       .init : 0xc0008000 - 0xc0021000   ( 100 kB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]       .text : 0xc0021000 - 0xc0343000   (3208 kB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.000000]       .data : 0xc035e000 - 0xc0386820   ( 163 kB)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] Hierarchical RCU implementation.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] NR_IRQS:192
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] AT91: 96 gpio irqs in 3 banks
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.000000] Console: colour dummy device 80x30
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.000000] console [ttyS0] enabled
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.180000] Calibrating delay loop... 197.42 BogoMIPS (lpj=987136)
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.390000] Mount-cache hash table entries: 512
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.390000] CPU: Testing write buffer coherency: ok
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.400000] NET: Registered protocol family 16
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.410000] Bovine fixups
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.410000] NAND Timing: STP=00010002, PLS=05030502, CYC=00060006, MDE=00030003
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.440000] bio: create slab <bio-0> at 0
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.450000] usbcore: registered new interface driver usbfs
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.460000] usbcore: registered new interface driver hub
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.460000] usbcore: registered new device driver usb
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.470000] Switching to clocksource pit
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.480000] NET: Registered protocol family 2
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.480000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.490000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.500000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.500000] TCP: Hash tables configured (established 1024 bind 1024)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.510000] TCP reno registered
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.510000] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.520000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.520000] NET: Registered protocol family 1
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.530000] RPC: Registered udp transport module.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.530000] RPC: Registered tcp transport module.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.540000] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.540000] at91_adc (Jul 25 2012-10:33:47)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.550000] Base address: c2808000 (phys: fffe0000)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.580000] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.590000] msgmni has been set to 55
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.600000] alg: No test for stdrng (krng)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.600000] io scheduler noop registered
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.610000] io scheduler deadline registered (default)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.650000] atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.660000] atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.670000] atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.690000] loop: module loaded
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.700000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.710000] NAND: Setting ECC page size to 2048
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.710000] Bad block table found at page 131008, version 0x00
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.710000] nand_read_bbt: Bad block at 0x000003260000
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.710000] nand_read_bbt: Bad block at 0x0000054e0000
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.710000] nand_read_bbt: Bad block at 0x0000059c0000
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.710000] nand_read_bbt: Bad block at 0x000006f20000
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.720000] 7 cmdlinepart partitions found on MTD device at91_nand
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.720000] Creating 7 MTD partitions on "at91_nand":
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.730000] 0x000000000000-0x000000100000 : "S1S2EN"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.730000] 0x000000100000-0x000000500000 : "rkern"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.740000] 0x000000500000-0x000001000000 : "rfs"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.740000] 0x000001000000-0x000001400000 : "kernel"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.750000] 0x000001400000-0x000003420000 : "root"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.760000] 0x000003420000-0x000008080000 : "usr"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.760000] 0x000008080000-0x000010000000 : "opt"
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.790000] MACB_mii_bus: probed
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.790000] eth0: Atmel MACB at 0xfffc4000 irq 21 (00:60:64:44:13:a3)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.800000] eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=ffffffff:1f, irq=-1)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.810000] udc: at91_udc version 3 May 2006
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.810000] i2c /dev entries driver
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.820000] AT91SAM9 Watchdog enabled (heartbeat=15 sec, nowayout=1)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.820000] Reset registers:
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.820000] SR: 00010000
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.830000] MR: 00000C01
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.830000] WDT registers:
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.830000] MR: 1FFF61FF
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.830000] SR: 00000000
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.840000] Registered led device: power
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.840000] Registered led device: wwan
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.840000] Registered led device: dcd
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.840000] Registered led device: service
Jan  1 10:00:10 NTC-6000 user.debug kernel: [    0.840000] Registered led device: rssi
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.840000] ledtrig-cdcs: Registering CDCS LED trigger group. (Jul 25 2012 10:34:55)
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.850000] Netfilter messages via NETLINK v0.30.
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.850000] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    0.860000] ctnetlink v0.93: registering with nfnetlink.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.870000] GRE over IPv4 tunneling driver
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.870000] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.880000] arp_tables: (C) 2002 David S. Miller
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.880000] TCP cubic registered
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.890000] Initializing XFRM netlink socket
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.890000] NET: Registered protocol family 10
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.900000] IPv6 over IPv4 tunneling driver
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.900000] NET: Registered protocol family 17
Jan  1 10:00:10 NTC-6000 user.info kernel: [    0.910000] NET: Registered protocol family 15
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    0.910000] Bridge firewalling registered
Jan  1 10:00:10 NTC-6000 user.err kernel: [    0.920000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Jan  1 10:00:10 NTC-6000 user.info kernel: [    1.070000] NAND/ECC 026D5800: ignoring erased page 
Jan  1 10:00:10 NTC-6000 user.info kernel: [    1.070000] NAND/ECC 026D9000: ignoring erased page 
Jan  1 10:00:10 NTC-6000 user.info kernel: [    1.080000] NAND/ECC 026D5800: ignoring erased page 
Jan  1 10:00:10 NTC-6000 user.info kernel: [    1.090000] NAND/ECC 026D9000: ignoring erased page (last message)
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    1.100000] Empty flash at 0x012cf780 ends at 0x012cf800
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    1.110000] Empty flash at 0x012d5ebc ends at 0x012d6000
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    1.120000] Empty flash at 0x012d9420 ends at 0x012d9800
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    1.140000] jffs2_scan_dirent_node(): Node CRC failed on node at 0x01384fe4: Read 0xffffffff, calculated 0x73026416
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    1.160000] Empty flash at 0x01385014 ends at 0x01385800
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    1.230000] JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    1.240000] VFS: Mounted root (jffs2 filesystem) on device 31:4.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    1.250000] Freeing init memory: 100K
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    3.650000] cdcs_DD: module license 'CDCS Proprietary' taints kernel.
Jan  1 10:00:10 NTC-6000 user.warn kernel: [    3.650000] Disabling lock debugging due to kernel taint
Jan  1 10:00:10 NTC-6000 user.info kernel: [    3.680000] Start cdcsDD, compiled Jul 25 2012 10:44:40
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.890000] UBI: attaching mtd5 to ubi0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.890000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.900000] UBI: logical eraseblock size:    126976 bytes
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.900000] UBI: smallest flash I/O unit:    2048
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.910000] UBI: VID header offset:          2048 (aligned 2048)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    4.910000] UBI: data offset:                4096
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.200000] UBI: attached mtd5 to ubi0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.200000] UBI: MTD device name:            "usr"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.210000] UBI: MTD device size:            76 MiB
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.210000] UBI: number of good PEBs:        608
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.220000] UBI: number of bad PEBs:         3
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.220000] UBI: max. allowed volumes:       128
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.220000] UBI: wear-leveling threshold:    4096
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.230000] UBI: number of internal volumes: 1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.230000] UBI: number of user volumes:     1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.240000] UBI: available PEBs:             0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.240000] UBI: total number of reserved PEBs: 608
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.250000] UBI: number of PEBs reserved for bad PEB handling: 6
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.250000] UBI: max/mean erase counter: 1243/1231
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.260000] UBI: image sequence number: 0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.260000] UBI: background thread "ubi_bgt0d" started, PID 548
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.540000] UBIFS: recovery needed
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.640000] UBIFS: recovery completed
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.640000] UBIFS: mounted UBI device 0, volume 0, name "usrl"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.650000] UBIFS: file system size:   74788864 bytes (73036 KiB, 71 MiB, 589 LEBs)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.660000] UBIFS: journal size:       3682304 bytes (3596 KiB, 3 MiB, 29 LEBs)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.660000] UBIFS: media format:       w4/r0 (latest is w4/r0)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.670000] UBIFS: default compressor: lzo
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    5.670000] UBIFS: reserved for root:  3532462 bytes (3449 KiB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.850000] UBI: attaching mtd6 to ubi1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.860000] UBI: physical eraseblock size:   131072 bytes (128 KiB)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.860000] UBI: logical eraseblock size:    126976 bytes
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.870000] UBI: smallest flash I/O unit:    2048
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.870000] UBI: VID header offset:          2048 (aligned 2048)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    6.880000] UBI: data offset:                4096
Jan  1 10:00:10 NTC-6000 user.info kernel: [    7.720000] cdcs_gpio (Jul 25 2012-10:34:42): major=249
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.960000] UBI: attached mtd6 to ubi1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.960000] UBI: MTD device name:            "opt"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.960000] UBI: MTD device size:            127 MiB
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.970000] UBI: number of good PEBs:        1016
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.970000] UBI: number of bad PEBs:         4
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.980000] UBI: max. allowed volumes:       128
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.980000] UBI: wear-leveling threshold:    4096
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.990000] UBI: number of internal volumes: 1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    7.990000] UBI: number of user volumes:     1
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.000000] UBI: available PEBs:             0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.000000] UBI: total number of reserved PEBs: 1016
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.010000] UBI: number of PEBs reserved for bad PEB handling: 10
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.010000] UBI: max/mean erase counter: 68/25
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.020000] UBI: image sequence number: 0
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.020000] UBI: background thread "ubi_bgt1d" started, PID 689
Jan  1 10:00:10 NTC-6000 user.info kernel: [    8.410000] device eth0 entered promiscuous mode
Jan  1 10:00:10 NTC-6000 user.info kernel: [    8.440000] br0: port 1(eth0) entering learning state
Jan  1 10:00:10 NTC-6000 user.info kernel: [    8.540000] br0: port 1(eth0) entering forwarding state
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    8.630000] JFFS2 notice: (415) check_node_data: wrong data CRC in data node at 0x01392edc: read 0xf007d5c8, calculated 0xdf83f67d.
Jan  1 10:00:10 NTC-6000 user.info kernel: [    8.810000] eth0: link up (100/Full)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.530000] UBIFS: recovery needed
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.640000] UBIFS: recovery completed
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.650000] UBIFS: mounted UBI device 1, volume 0, name "opt"
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.650000] UBIFS: file system size:   125960192 bytes (123008 KiB, 120 MiB, 992 LEBs)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.660000] UBIFS: journal size:       6348800 bytes (6200 KiB, 6 MiB, 50 LEBs)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.670000] UBIFS: media format:       w4/r0 (latest is w4/r0)
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.670000] UBIFS: default compressor: lzo
Jan  1 10:00:10 NTC-6000 user.notice kernel: [    9.680000] UBIFS: reserved for root:  4952683 bytes (4836 KiB)
Jan  1 10:00:10 NTC-6000 user.notice root: sys[/bin/sh /etc/init.d/rc3.d/S302usb start ]: (Bovine/ntc_6908) stop_3G
Jan  1 10:00:10 NTC-6000 local5.err rdbmgr-tpl[862]: template /etc/cdcs/conf/mgr_templates/common ignored for not having a proper extention
Jan  1 10:00:10 NTC-6000 local5.err rdbmgr-tpl[862]: template /etc/cdcs/conf/mgr_templates/macipportfilter.sh ignored for not having a proper extention
Jan  1 10:00:10 NTC-6000 local5.err rdbmgr-tpl[862]: template /etc/cdcs/conf/mgr_templates/run_template.sh ignored for not having a proper extention
Jan  1 10:00:11 NTC-6000 user.notice root: sys[/bin/sh /etc/init.d/rc3.d/S302usb start ]: (Bovine/ntc_6908) Ignored: stop_WiFi
Jan  1 10:00:11 NTC-6000 user.notice root: smstools: Starting SMS Tx Counter Reset daemon...
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.sim.status.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.system_network_status.current_band. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.system_network_status.system_mode. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.1.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.2.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.3.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.4.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.5.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.6.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable telnet.passwd.trigger. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable tr069.request.uri. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.diag_if. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.system.factory. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.vpn.gre.profile. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable ipsec.0.profile. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.led.override. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.system_network_status.pdp0_stat. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable confv250.trigger. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 user.notice root: smstools: Checking pending SMS diagnostic command...
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.firewall.dnat.enable. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.1.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.2.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.3.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.4.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.5.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.6.iplocal. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.ntp.touch. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.system_network_status.network. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.max_sub_if. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.V250_if.1. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.data_if.1. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.vpn.pptp.profile. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable link.profile.wwan.disable. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 user.notice root: smstools: No pending SMS diagnostic command
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable wwan.0.sms.received_message.status. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable service.syslog.option.sizekb. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 local5.err rdbmgr-tpl[862]: unable to subscribe variable tr069.apn.validaty.trigger. trying to create (stat=-2)
Jan  1 10:00:11 NTC-6000 user.notice interface.template: IP address changed to 192.168.20.1:255.255.255.0
Jan  1 10:00:11 NTC-6000 user.notice root: smstools: use ext. sms client is off...
Jan  1 10:00:11 NTC-6000 user.notice interface.template: Captive portal interface disabled
Jan  1 10:00:11 NTC-6000 user.notice interface.template: apply router host name
Jan  1 10:00:11 NTC-6000 user.notice interface.template: ## /etc/hosts - HOSTNAME=my.router,ADDRESS_IP=192.168.20.1
Jan  1 10:00:11 NTC-6000 user.notice interface.template: 127.0.0.1	localhost
Jan  1 10:00:11 NTC-6000 user.notice interface.template: 192.168.20.1 my.router  # from link.profile.0.hostname (created by interfaces.template)
Jan  1 10:00:12 NTC-6000 user.notice root: sys[/bin/sh /etc/init.d/rc3.d/S302usb start ]: (Bovine/ntc_6908) Ignored: cpld_mode
Jan  1 10:00:12 NTC-6000 daemon.info dnsmasq[942]: started, version 2.57 cachesize 150
Jan  1 10:00:12 NTC-6000 daemon.info dnsmasq[942]: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP no-IDN
Jan  1 10:00:12 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCP, IP range 192.168.20.100 -- 192.168.20.199, lease time 1d
Jan  1 10:00:12 NTC-6000 daemon.warn dnsmasq[942]: failed to access /etc/resolv.conf: No such file or directory
Jan  1 10:00:12 NTC-6000 daemon.info dnsmasq[942]: read /etc/hosts - 2 addresses
Jan  1 10:00:12 NTC-6000 daemon.info dnsmasq-dhcp[942]: read /tmp/hostfiles
Jan  1 10:00:12 NTC-6000 user.notice 20_dnsmasq.template: Stopping service dhcrelay
Jan  1 10:00:12 NTC-6000 user.notice activate_cportal.template: Disabling captive-portal capture. (Cause: administrative-disable)
Jan  1 10:00:13 NTC-6000 user.notice cportal.template: Shutting down captive-portal.
Jan  1 10:00:13 NTC-6000 user.notice cwmpd-crd.template: Stopping TR-069 connection request daemon.
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /module/usbnet
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /module/usbnet
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /module/sierra_net
Jan  1 10:00:13 NTC-6000 user.info kernel: [   13.710000] usbcore: registered new interface driver sierra_net
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /module/sierra_net
Jan  1 10:00:13 NTC-6000 user.notice cwmpd.template: stopping TR-069 client
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/sierra_net
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/sierra_net
Jan  1 10:00:13 NTC-6000 user.notice hotplug: add, /module/usbserial
Jan  1 10:00:13 NTC-6000 user.notice rfmtool.template: started
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /module/usbserial
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: configuration
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: ===============================
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: service.rfmtool.enable=
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: service.rfmtool.tcp_port=
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: wwan.0.diag_if=
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.080000] usbcore: registered new interface driver usbserial
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.120000] USB Serial support registered for generic
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.200000] usbcore: registered new interface driver usbserial_generic
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.210000] usbserial: USB Serial Driver core
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/usbserial
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial/drivers/generic
Jan  1 10:00:14 NTC-6000 user.notice rfmtool.template: tcp port or serial port not found
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/usbserial_generic
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/usbserial
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial/drivers/generic
Jan  1 10:00:14 NTC-6000 user.notice dmz.template: updating iptables for DMZ - DMZ_EN=0,DMZ_ADD=
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/usbserial_generic
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /module/sierra
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.500000] USB Serial support registered for Sierra USB modem
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.510000] usbcore: registered new interface driver sierra
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.520000] sierra: v.1.7.34:USB Driver for Sierra Wireless USB modems
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /module/sierra
Jan  1 10:00:14 NTC-6000 user.notice dmz.template: disable DMZ
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial/drivers/sierra
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/sierra
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb/drivers/sierra
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /bus/usb-serial/drivers/sierra
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.780000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.780000] ohci_hcd: block sizes: ed 64 td 64
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.780000] at91_ohci at91_ohci: start
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /module/ohci_hcd
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.820000] OHCI startup delay - and now adding hcd
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.820000] [Tc5]usb_hcd_at91_probe:157: AIC_IPR=00000000, AIC_IMR=0020041E, AIC_CISR=00000000
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.830000] at91_ohci at91_ohci: AT91 OHCI
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.830000] drivers/usb/core/inode.c: creating file 'devices'
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.830000] drivers/usb/core/inode.c: creating file '001'
Jan  1 10:00:14 NTC-6000 user.notice dmz.template: Chain DMZ (1 references)
Jan  1 10:00:14 NTC-6000 user.notice dmz.template:  pkts bytes target     prot opt in     out     source               destination         
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.870000] at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.880000] at91_ohci at91_ohci: supports USB remote wakeup
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.880000] at91_ohci at91_ohci: irq 20, io mem 0x00500000
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.880000] at91_ohci at91_ohci: created debug files
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /module/ohci_hcd
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /class/usbmon/usbmon1
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: OHCI controller state
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: OHCI 1.0, NO legacy support registers
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: control 0x083 HCFS=operational CBSR=3
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: cmdstatus 0x00000 SOC=0
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: intrstatus 0x00000004 SF
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: intrenable 0x8000005a MIE RHSC UE RD WDH
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: hcca frame #0005
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: roothub.b 00000000 PPCM=0000 DR=0000
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: roothub.status 00008000 DRWE
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: roothub.portstatus [0] 0x00000100 PPS
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] at91_ohci at91_ohci: roothub.portstatus [1] 0x00000100 PPS
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] usb usb1: default language 0x0409
Jan  1 10:00:14 NTC-6000 user.debug kernel: [   14.940000] usb usb1: udev 1, busnum 1, minor = 0
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.940000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.950000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.950000] usb usb1: Product: AT91 OHCI
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.960000] usb usb1: Manufacturer: Linux 2.6.34.4 ohci_hcd
Jan  1 10:00:14 NTC-6000 user.info kernel: [   14.960000] usb usb1: SerialNumber: at91
Jan  1 10:00:14 NTC-6000 user.notice hotplug: add, /class/usbmon/usbmon1
Jan  1 10:00:15 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.100000] usb usb1: usb_probe_device
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.100000] usb usb1: configuration #1 chosen from 1 choice
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.100000] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: usb_probe_interface
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: usb_probe_interface - got id
Jan  1 10:00:15 NTC-6000 user.info kernel: [   15.110000] hub 1-0:1.0: USB hub found
Jan  1 10:00:15 NTC-6000 user.info kernel: [   15.110000] hub 1-0:1.0: 2 ports detected
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: standalone hub
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: no power switching (usb 1.0)
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: no over-current protection
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: power on to power good time: 4ms
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: local power source is good
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] hub 1-0:1.0: trying to enable port power on non-switchable hub
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.110000] drivers/usb/core/inode.c: creating file '001'
Jan  1 10:00:15 NTC-6000 user.info kernel: [   15.110000] [Tc5]usb_hcd_at91_probe:162: AIC_IPR=00000000, AIC_IMR=0030041E, AIC_CISR=00000000
Jan  1 10:00:15 NTC-6000 user.info kernel: [   15.120000] [Tc5]usb_hcd_at91_probe:172: Re-enabling interrupt 20
Jan  1 10:00:15 NTC-6000 user.debug kernel: [   15.210000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
Jan  1 10:00:15 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-0:1.0
Jan  1 10:00:15 NTC-6000 user.notice hotplug: add, /bus/platform/drivers/at91_ohci
Jan  1 10:00:15 NTC-6000 user.notice hotplug: add, /bus/platform/drivers/at91_ohci
Jan  1 10:00:15 NTC-6000 user.notice pm_dev_change(1091): starting - act=add sub=usb phys= /dev/usb1 devpath=/devices/platform/at91_ohci/usb1 SEQNUM=424
Jan  1 10:00:15 NTC-6000 user.notice hotplug: Loading a driver for usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00
Jan  1 10:00:15 NTC-6000 user.notice dyndns.template: Stopping service ez-ipupdate
Jan  1 10:00:15 NTC-6000 user.notice pm_dev_change(1091): ### inserted - devpath=/devices/platform/at91_ohci/usb1 (usb_port_status)
Jan  1 10:00:15 NTC-6000 user.notice root: sys[/bin/sh /etc/init.d/rc3.d/S302usb start ]: (Bovine/ntc_6908) Ignored: start_Wifi
Jan  1 10:00:15 NTC-6000 user.notice pm_dev_change(1091): launching /usr/bin/cdcs_init_wwan_pm -- -a 'add'
Jan  1 10:00:15 NTC-6000 user.notice cdcs_init_wwan_pm(1091): udev_path=/devices/platform/at91_ohci/usb1
Jan  1 10:00:15 NTC-6000 user.notice cdcs_init_wwan_pm(1091): udev product = 1d6b/1/206
Jan  1 10:00:16 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPDISCOVER(br0) 10.37.129.3 00:1c:42:06:f5:4a 
Jan  1 10:00:16 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPOFFER(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:16 NTC-6000 user.notice cdcs_init_wwan_pm(1091): device(1d6b:0001:206) - directly looking up in database
Jan  1 10:00:16 NTC-6000 user.notice cdcs_init_wwan_pm(1091): device(1d6b:0001:206) - not matched
Jan  1 10:00:16 NTC-6000 user.notice cdcs_init_wwan_pm(1091): done
Jan  1 10:00:16 NTC-6000 user.notice pm_dev_change(1091): done
Jan  1 10:00:16 NTC-6000 user.notice root: sys[/bin/sh /etc/init.d/rc3.d/S302usb start ]: (Bovine/ntc_6908) start_3G
Jan  1 10:00:17 NTC-6000 user.notice me.template: bypass because wwan is not activated yet
Jan  1 10:00:17 NTC-6000 user.notice nat.template: started
Jan  1 10:00:17 NTC-6000 user.notice nat.template: configuration
Jan  1 10:00:17 NTC-6000 user.notice nat.template: ======================================================
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.port='8080'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.webenable='0'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.telnetenable='0'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.pingenable='0'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.pad_encode='0'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.open.port=''
Jan  1 10:00:17 NTC-6000 user.notice nat.template: link.profile.0.address='192.168.20.1'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.firewall.enable='1'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: admin.remote.rmthttpport='8080'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: service.firewall.dmz.enable='0'
Jan  1 10:00:17 NTC-6000 user.notice nat.template: iptables -t nat -F nat_dnat
Jan  1 10:00:17 NTC-6000 user.notice nat.template: iptables -F filter
Jan  1 10:00:17 NTC-6000 user.notice nat.template: iptables -A filter -p ! icmp -m state --state ESTABLISHED,RELATED -j ACCEPT
Jan  1 10:00:17 NTC-6000 user.notice nat.template: Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
Jan  1 10:00:17 NTC-6000 user.debug kernel: [   17.860000] eth0: no IPv6 routers present
Jan  1 10:00:17 NTC-6000 user.notice nat.template: iptables -A filter -p tcp -i ra0 -j DROP
Jan  1 10:00:17 NTC-6000 user.notice hotplug: add, /module/xt_state
Jan  1 10:00:17 NTC-6000 user.notice hotplug: add, /module/xt_state
Jan  1 10:00:17 NTC-6000 user.notice nat.template: iptables -A filter -p icmp -i ra0 --icmp-type 8 -j DROP
Jan  1 10:00:18 NTC-6000 user.notice nat.template: ### nat_dnat
Jan  1 10:00:18 NTC-6000 user.notice nat.template: iptables -t nat -v -n -L nat_dnat
Jan  1 10:00:18 NTC-6000 user.notice nat.template: Chain nat_dnat (1 references)
Jan  1 10:00:18 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Jan  1 10:00:18 NTC-6000 user.notice nat.template: ### filter
Jan  1 10:00:18 NTC-6000 user.notice nat.template: iptables -t filter -v -n -L filter
Jan  1 10:00:18 NTC-6000 user.notice nat.template: Chain filter (1 references)
Jan  1 10:00:18 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Jan  1 10:00:18 NTC-6000 user.notice nat.template:     0     0 ACCEPT    !icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
Jan  1 10:00:18 NTC-6000 user.notice nat.template:     0     0 DROP       tcp  --  ra0    *       0.0.0.0/0            0.0.0.0/0           
Jan  1 10:00:18 NTC-6000 user.notice nat.template:     0     0 DROP       icmp --  ra0    *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
Jan  1 10:00:18 NTC-6000 user.notice nat.template: done
Jan  1 10:00:18 NTC-6000 user.notice nsupdate.template: on-connection only - no crontime
Jan  1 10:00:18 NTC-6000 user.notice dnsupdate: starting...
Jan  1 10:00:18 NTC-6000 user.notice dnsupdate: nsudpate not enabled
Jan  1 10:00:18 NTC-6000 user.notice ntp.template: started
Jan  1 10:00:18 NTC-6000 user.notice ntp.template: current config / SERVICE_EN=1,NTP_SERVER_ADDR=0.netcomm.pool.ntp.org
Jan  1 10:00:18 NTC-6000 user.notice ntp.template: * */24 * * * /sbin/ntpclient.sh
Jan  1 10:00:18 NTC-6000 user.notice ntp.template: done
Jan  1 10:00:19 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPDISCOVER(br0) d4:9a:20:d5:1c:2e 
Jan  1 10:00:19 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPOFFER(br0) 192.168.20.174 d4:9a:20:d5:1c:2e 
Jan  1 10:00:19 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPREQUEST(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:19 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPACK(br0) 192.168.20.186 00:1c:42:06:f5:4a home
Jan  1 10:00:19 NTC-6000 user.debug kernel: [   19.210000] br0: no IPv6 routers present
Jan  1 10:00:19 NTC-6000 user.notice periodicping.template: Stopping service periodicpingd
Jan  1 10:00:19 NTC-6000 daemon.info dhcp_lease_update[1299]: event = add, mac = 00:1c:42:06:f5:4a, ip = 192.168.20.186, host = home, expiry = 86419
Jan  1 10:00:19 NTC-6000 daemon.info dhcp_lease_update[1299]: adding lease
Jan  1 10:00:19 NTC-6000 user.notice pppoe.template: wwan.0.max_sub_if not found - pppoe cannot be launching
Jan  1 10:00:20 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPREQUEST(br0) 192.168.20.174 d4:9a:20:d5:1c:2e 
Jan  1 10:00:20 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPACK(br0) 192.168.20.174 d4:9a:20:d5:1c:2e 
Jan  1 10:00:20 NTC-6000 user.notice rip.template: Stopping service ripd
Jan  1 10:00:20 NTC-6000 daemon.warn dnsmasq[942]: child process exited with status 1
Jan  1 10:00:20 NTC-6000 user.notice route.template: routing table before deleting
Jan  1 10:00:20 NTC-6000 user.notice route.template: Kernel IP routing table
Jan  1 10:00:20 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Jan  1 10:00:20 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Jan  1 10:00:20 NTC-6000 user.notice route.template: deleting previous static route table...
Jan  1 10:00:20 NTC-6000 user.notice route.template: truncating previous table...
Jan  1 10:00:20 NTC-6000 user.notice route.template: routing table before adding
Jan  1 10:00:20 NTC-6000 user.notice route.template: Kernel IP routing table
Jan  1 10:00:20 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Jan  1 10:00:20 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Jan  1 10:00:20 NTC-6000 user.notice route.template: adding new static route table...
Jan  1 10:00:20 NTC-6000 user.notice route.template: reading configuration - service.router.static.route.trigger
Jan  1 10:00:20 NTC-6000 user.notice route.template: skipped - trigger
Jan  1 10:00:20 NTC-6000 user.notice route.template: new routing table
Jan  1 10:00:20 NTC-6000 user.notice route.template: Kernel IP routing table
Jan  1 10:00:20 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Jan  1 10:00:20 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Jan  1 10:00:21 NTC-6000 user.notice root: smstools: msgcnt , newmsg_rx 0, blked , pend 
Jan  1 10:00:21 NTC-6000 user.notice smstool.template: started
Jan  1 10:00:21 NTC-6000 user.notice smstool.template: done
Jan  1 10:00:21 NTC-6000 user.notice snmp.template: Stopping service snmpd
Jan  1 10:00:22 NTC-6000 user.notice syslogd.template: started
Jan  1 10:00:22 NTC-6000 user.notice syslogd.template: current configuration - sizekb=,remotehost=
Jan  1 10:00:22 NTC-6000 user.notice syslogd.template: new configuration - new_sizekb=256,new_remotehost=
Jan  1 10:00:22 NTC-6000 user.notice syslogd.template: no configuration changed - skipping
Jan  1 10:00:22 NTC-6000 user.notice root: tr069_APNValidityCheck.template APN Index=, STATUS=
Jan  1 10:00:22 NTC-6000 user.notice vrrp.template: vrrpd mac address clone stopped - disable br0 promiscious mode
Jan  1 10:00:22 NTC-6000 user.notice vrrp.template: Stopping service vrrpd
Jan  1 10:00:22 NTC-6000 user.debug kernel: [   22.960000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
Jan  1 10:00:22 NTC-6000 user.debug kernel: [   22.960000] at91_ohci at91_ohci: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
Jan  1 10:00:22 NTC-6000 user.debug kernel: [   22.960000] hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.130000] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.210000] at91_ohci at91_ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.270000] usb 1-1: new full speed USB device using at91_ohci and address 2
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.350000] at91_ohci at91_ohci: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
Jan  1 10:00:23 NTC-6000 user.warn kernel: [   23.450000] usb 1-1: config 1 has an invalid interface number: 7 but max is 5
Jan  1 10:00:23 NTC-6000 user.warn kernel: [   23.460000] usb 1-1: config 1 has no interface number 5
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.460000] usb 1-1: default language 0x0409
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.470000] usb 1-1: udev 2, busnum 1, minor = 1
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.470000] usb 1-1: New USB device found, idVendor=1199, idProduct=68a3
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.470000] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.480000] usb 1-1: Product: MC8790V
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.490000] usb 1-1: Manufacturer: Sierra Wireless, Incorporated
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.540000] usb 1-1: usb_probe_device
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.540000] usb 1-1: configuration #1 chosen from 1 choice
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.550000] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] sierra_net 1-1:1.0: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] sierra_net 1-1:1.0: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] usbserial_generic 1-1:1.0: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] usbserial_generic 1-1:1.0: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] sierra 1-1:1.0: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.560000] sierra 1-1:1.0: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.560000] sierra 1-1:1.0: Sierra USB modem converter detected
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.560000] usb 1-1: APM supported, enabling autosuspend.
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.600000] usb 1-1: Sierra USB modem converter now attached to ttyUSB0
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.600000] usb 1-1: adding 1-1:1.1 (config #1, interface 1)
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] sierra_net 1-1:1.1: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] sierra_net 1-1:1.1: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] usbserial_generic 1-1:1.1: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] usbserial_generic 1-1:1.1: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] sierra 1-1:1.1: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.630000] sierra 1-1:1.1: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.630000] sierra 1-1:1.1: Sierra USB modem converter detected
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.650000] usb 1-1: APM supported, enabling autosuspend.
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.680000] usb 1-1: Sierra USB modem converter now attached to ttyUSB1
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.680000] usb 1-1: adding 1-1:1.2 (config #1, interface 2)
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] sierra_net 1-1:1.2: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] sierra_net 1-1:1.2: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] usbserial_generic 1-1:1.2: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] usbserial_generic 1-1:1.2: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] sierra 1-1:1.2: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.700000] sierra 1-1:1.2: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.700000] sierra 1-1:1.2: Sierra USB modem converter detected
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.700000] usb 1-1: APM supported, enabling autosuspend.
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.0
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.0/ttyUSB0
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.780000] usb 1-1: Sierra USB modem converter now attached to ttyUSB2
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.790000] usb 1-1: adding 1-1:1.3 (config #1, interface 3)
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.1
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] sierra_net 1-1:1.3: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] sierra_net 1-1:1.3: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] usbserial_generic 1-1:1.3: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] usbserial_generic 1-1:1.3: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] sierra 1-1:1.3: usb_probe_interface
Jan  1 10:00:23 NTC-6000 user.debug kernel: [   23.940000] sierra 1-1:1.3: usb_probe_interface - got id
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.940000] sierra 1-1:1.3: Sierra USB modem converter detected
Jan  1 10:00:23 NTC-6000 user.info kernel: [   23.940000] usb 1-1: APM supported, enabling autosuspend.
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.1/ttyUSB1
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.0/ttyUSB0
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB2
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB1
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.2
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.2/ttyUSB2
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB0
Jan  1 10:00:23 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:24 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:24 NTC-6000 user.notice pm_dev_change(1478): starting - act=add sub=usb phys= /dev/1-1 devpath=/devices/platform/at91_ohci/usb1/1-1 SEQNUM=428
Jan  1 10:00:24 NTC-6000 user.info kernel: [   24.120000] usb 1-1: Sierra USB modem converter now attached to ttyUSB3
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.120000] usb 1-1: adding 1-1:1.4 (config #1, interface 4)
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] sierra_net 1-1:1.4: usb_probe_interface
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] sierra_net 1-1:1.4: usb_probe_interface - got id
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] usbserial_generic 1-1:1.4: usb_probe_interface
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] usbserial_generic 1-1:1.4: usb_probe_interface - got id
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] sierra 1-1:1.4: usb_probe_interface
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.130000] sierra 1-1:1.4: usb_probe_interface - got id
Jan  1 10:00:24 NTC-6000 user.info kernel: [   24.130000] sierra 1-1:1.4: Sierra USB modem converter detected
Jan  1 10:00:24 NTC-6000 user.info kernel: [   24.140000] usb 1-1: APM supported, enabling autosuspend.
Jan  1 10:00:23 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.1/ttyUSB1
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.3
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB2
Jan  1 10:00:24 NTC-6000 user.info kernel: [   24.190000] usb 1-1: Sierra USB modem converter now attached to ttyUSB4
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.200000] usb 1-1: adding 1-1:1.7 (config #1, interface 7)
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.2/ttyUSB2
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB0
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.300000] sierra_net 1-1:1.7: usb_probe_interface
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.300000] sierra_net 1-1:1.7: usb_probe_interface - got id
Jan  1 10:00:24 NTC-6000 user.info kernel: [   24.330000] sierra_net 1-1:1.7: wwan0: register 'sierra_net' at usb-at91-1, Sierra Wireless USB-to-WWAN Modem, 66:e2:39:f7:01:07
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.340000] drivers/usb/core/inode.c: creating file '002'
Jan  1 10:00:24 NTC-6000 user.debug kernel: [   24.340000] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0002
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB1
Jan  1 10:00:24 NTC-6000 user.notice pm_dev_change(1478): ### inserted - devpath=/devices/platform/at91_ohci/usb1/1-1 (usb_port_status)
Jan  1 10:00:24 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:24 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB3
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.3/ttyUSB3
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.4/ttyUSB4
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB4
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.7
Jan  1 10:00:24 NTC-6000 user.notice pm_dev_change(1478): launching /usr/bin/cdcs_init_wwan_pm -- -a 'add'
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB3
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.4/ttyUSB4
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.4
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/net/wwan0
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /class/tty/ttyUSB4
Jan  1 10:00:24 NTC-6000 user.notice hotplug: add, /devices/platform/at91_ohci/usb1/1-1/1-1:1.3/ttyUSB3
Jan  1 10:00:24 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:24 NTC-6000 user.notice hotplug: Loading a driver for usb:v1199p68A3d0006dc00dsc00dp00icFFiscFFipFF
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): udev_path=/devices/platform/at91_ohci/usb1/1-1
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): udev product = 1199/68a3/6
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): building interface table - '/dev/ttyUSB0' '0'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): building interface table - '/dev/ttyUSB1' '1'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): building interface table - '/dev/ttyUSB2' '2'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): building interface table - '/dev/ttyUSB3' '3'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): building interface table - '/dev/ttyUSB4' '4'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): device(1199:68a3:6) - directly looking up in database
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): incorrect product name - v=1199,p=68a3,product=/^AC7.*$/,cur=MC8790V
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): device(1199:68a3:6:MC8790V) - matched (cnt=-:product=-)
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.module_name='*SWI-NET3'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.product_udev='MC8790V'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.vendor='1199'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.prod='68a3'
Jan  1 10:00:25 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.usbif_cnt='6'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.netif='wwan'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.if='cns'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.script='/etc/cdcs/connectscripts/SUSBNET'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.mgmt_if='/dev/ttyUSB0'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.diag_if='/dev/ttyUSB1'
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: started
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: configuration
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: ===============================
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: service.rfmtool.enable=
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: service.rfmtool.tcp_port=
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: wwan.0.diag_if=/dev/ttyUSB1
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.gps_if='/dev/ttyUSB2'
Jan  1 10:00:26 NTC-6000 user.notice rfmtool.template: tcp port or serial port not found
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.V250_if.1='/dev/ttyUSB3'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.max_sub_if='1'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.data_if.1='/dev/ttyUSB4'
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.data_if.2=''
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.data_if.3=''
Jan  1 10:00:26 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPRELEASE(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:26 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPDISCOVER(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:26 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPOFFER(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:26 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPREQUEST(br0) 192.168.20.186 00:1c:42:06:f5:4a 
Jan  1 10:00:26 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.last_if='/dev/ttyUSB4'
Jan  1 10:00:26 NTC-6000 daemon.info dnsmasq-dhcp[942]: DHCPACK(br0) 192.168.20.186 00:1c:42:06:f5:4a home
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_set wwan.0.module_type='sierra'
Jan  1 10:00:27 NTC-6000 daemon.info dhcp_lease_update[1683]: event = del, mac = 00:1c:42:06:f5:4a, ip = 192.168.20.186, host = home, expiry = 86419
Jan  1 10:00:27 NTC-6000 daemon.info dhcp_lease_update[1683]: deleting lease
Jan  1 10:00:27 NTC-6000 user.notice pppoe.template: Stopping service pppoe-serial
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): launching a manager... if_type=cns
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): terminating all port managers...
Jan  1 10:00:27 NTC-6000 daemon.info dhcp_lease_update[1704]: event = add, mac = 00:1c:42:06:f5:4a, ip = 192.168.20.186, host = home, expiry = 86426
Jan  1 10:00:27 NTC-6000 daemon.info dhcp_lease_update[1704]: adding lease
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): all port managers terminated
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): V_SMS is enabled in variants.sh
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): rdb_sms is enabled
Jan  1 10:00:27 NTC-6000 user.notice cdcs_init_wwan_pm(1478): cnsmgr starting... /usr/bin/cnsmgr -p /dev/ttyUSB0 -i 0  -l /dev/ttyUSB4
Jan  1 10:00:28 NTC-6000 local5.err cns-manager[1733]: start - LOG_ERR
Jan  1 10:00:28 NTC-6000 user.notice cdcs_init_wwan_pm(1478): trigger modem_emulator starting...
Jan  1 10:00:28 NTC-6000 user.notice cdcs_init_wwan_pm(1478): done
Jan  1 10:00:28 NTC-6000 user.notice pm_dev_change(1478): done
Jan  1 10:00:28 NTC-6000 user.notice me.template: module_type='cns'
Jan  1 10:00:28 NTC-6000 user.notice me.template: module_at_port='/dev/ttyUSB3'
Jan  1 10:00:28 NTC-6000 user.notice me.template: module_dat_port='/dev/ttyUSB4'
Jan  1 10:00:28 NTC-6000 user.notice me.template: module_made='sierra'
Jan  1 10:00:28 NTC-6000 user.notice me.template: padd deactivated - starting modem_emulator - module_at_port=/dev/ttyUSB3
Jan  1 10:00:28 NTC-6000 user.info timedaemon[691]: bypassing source [mobile] - blank trigger
Jan  1 10:00:28 NTC-6000 local5.err cns-manager[1733]: run cnsmgr with SMS function!
Jan  1 10:00:28 NTC-6000 local5.err cns-manager[1733]: ----------------------------------------------------------------------
Jan  1 10:00:29 NTC-6000 user.notice pm_dev_change(1780): starting - act=add sub=net phys=sierra_net devpath=/class/net/wwan0 SEQNUM=445
Jan  1 10:00:29 NTC-6000 user.notice pm_dev_change(1780): net inserted - devpath=/class/net/wwan0,physdevpath=/devices/platform/at91_ohci/usb1/1-1/1-1:1.7 (usb_port_status)
Jan  1 10:00:29 NTC-6000 user.notice pm_dev_change(1780): ### net detected - interface=wwan0,devpath=/class/net/wwan0,physdevpath=/devices/platform/at91_ohci/usb1/1-1/1-1:1.7 (usb_port_status)
Jan  1 10:00:29 NTC-6000 user.notice pm_dev_change(1780): launching /usr/bin/cdcs_init_wwan_pm -- -a 'net'
Jan  1 10:00:29 NTC-6000 user.err modem_emulator: use the given port / not using wwan.0.V250_if.1 - port=/dev/ttyUSB3
Jan  1 10:00:29 NTC-6000 user.debug modem_emulator: waiting for port '/dev/ttyUSB3' for 30 seconds...
Jan  1 10:00:29 NTC-6000 user.debug modem_emulator: waiting for port '/dev/ttyUSB3' done
Jan  1 10:00:29 NTC-6000 user.notice cdcs_init_wwan_pm(1780): udev_path=/class/net/wwan0
Jan  1 10:00:29 NTC-6000 user.notice cdcs_init_wwan_pm(1780): udev product = 
Jan  1 10:00:29 NTC-6000 user.notice cdcs_init_wwan_pm(1780): net detected - wwan0
Jan  1 10:00:29 NTC-6000 user.notice pm_dev_change(1780): done
Jan  1 10:00:30 NTC-6000 user.notice root: smstools: msgcnt , newmsg_rx 0, blked , pend 
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: do not read modem model name, leave it for modem_emulator
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(0, 0x0) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(1, 0x1041) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(2, 0x1001) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(3, 0x1020) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(4, 0x1087) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(5, 0x1088) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(6, 0x1066) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(7, 0x102c) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(8, 0x700a) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(9, 0x1006) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(10, 0x7004) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(11, 0x700b) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(12, 0x103c) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(13, 0x1042) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(14, 0x100f) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(15, 0xf0a) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(16, 0xf0e) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(17, 0xf0b) = 1
Jan  1 10:00:32 NTC-6000 local5.err cns-manager[1733]: sierracns_writeNotifyEnable(18, 0xf0c) = 1
Jan  1 10:00:33 NTC-6000 local5.info connection_mgr[685]: SIM card is ready
Jan  1 10:00:34 NTC-6000 user.notice root: smstools: msgcnt 0, newmsg_rx 0, blked , pend 
Jan  1 10:00:38 NTC-6000 local5.info connection_mgr[685]: starting WWAN profile(s) - ps attached
Jan  1 10:00:38 NTC-6000 local5.debug connection_mgr[685]: manage_connection: connection 0 using profile 1 - trycnt=1/0
Jan  1 10:00:38 NTC-6000 local5.debug connection_mgr[1909]: manage_connection: signals disabled
Jan  1 10:00:38 NTC-6000 local5.debug connection_mgr[1909]: manage_connection: stdio redirected
Jan  1 10:00:38 NTC-6000 local5.debug connection_mgr[1909]: manage_connection: new sid created
Jan  1 10:00:38 NTC-6000 local5.info connection_mgr[1909]: Starting /etc/cdcs/connectscripts/SUSBNET 1 0
Jan  1 10:00:38 NTC-6000 local5.debug connection_mgr[685]: manager pid for profile 1 = 1909
Jan  1 10:00:38 NTC-6000 user.notice root: SUSBNET using udev interface name NETIF=wwan0
Jan  1 10:00:38 NTC-6000 user.notice root: SUSBNET auto-apn is enabled in 'webinterface.autoapn' rdb
Jan  1 10:00:38 NTC-6000 user.notice root: SUSBNET auto APN: 'telstra.internet' USER: '' PASS: '' AUTH: ''
Jan  1 10:00:39 NTC-6000 user.notice root: SUSBNET APN name=telstra.internet / provider=Telstra / signal=-60 dBm / service=UMTS
Jan  1 10:00:39 NTC-6000 user.notice root: SUSBNET rv=1.9.107.10 / comp=*SWI-NET3
Jan  1 10:00:39 NTC-6000 user.notice root: SUSBNET dongle= / ver=K2_0_7_30AP C:/WS/FW/K2_0_7_30AP/MSM6290/SRC 2010/01/18 11:56:46
Jan  1 10:00:39 NTC-6000 user.notice root: SUSBNET writing cns profile - cns_profile write id 0 apn telstra.internet chap
Jan  1 10:00:42 NTC-6000 user.notice root: SUSBNET activating cns profile
Jan  1 10:00:56 NTC-6000 user.info timedaemon[691]: read - time source [mobile] Mon Aug 20 09:21:11 2012  (1345418415 sec)
Jan  1 10:00:56 NTC-6000 user.info timedaemon[691]: system clock changed time source from [default] to [mobile] 
Jan  1 10:00:56 NTC-6000 user.info timedaemon[691]: syncing system clock to [mobile]
Aug 20 09:21:16 NTC-6000 cron.err crond[798]: time disparity of 22423641 minutes detected
Aug 20 09:21:46 NTC-6000 user.info timedaemon[691]: read - time source [browser] Mon Aug 20 09:21:00 2012  (-46 sec)
Aug 20 09:21:50 NTC-6000 user.info timedaemon[691]: read - time source [mobile] Mon Aug 20 09:21:50 2012  (0 sec)
Aug 20 09:21:57 NTC-6000 user.notice root: SUSBNET making net interface (wwan0) up
Aug 20 09:21:57 NTC-6000 user.info kernel: [  102.560000] ADDRCONF(NETDEV_UP): wwan0: link is not ready
Aug 20 09:21:57 NTC-6000 user.info kernel: [  102.610000] ADDRCONF(NETDEV_CHANGE): wwan0: link becomes ready
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: setting interface - ip='10.247.187.41', broadcast='', subnet='255.255.255.255' / ifconfig 'wwan0' '10.247.187.41' netmask 255.255.255.255
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: deleting default routers
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: metric = 0
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: adding default routers
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: new router - 10.247.187.41
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: #### new routing table
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: Kernel IP routing table
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: 0.0.0.0         10.247.187.41   0.0.0.0         UG    0      0        0 wwan0
Aug 20 09:21:57 NTC-6000 user.notice udhcpc.sh: calling update_resolv.sh
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: getting the default gateway
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: resolv_if='wwan0'
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: resolv_metric='0'
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: nwinf.wwan0.dns='10.4.182.20 10.4.81.103'
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: nwinf.wwan0.domain=''
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: updating /etc/resolv.conf for 'wwan0'
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: new dns - 10.4.182.20
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: new dns - 10.4.81.103
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: #### new resolv.conf
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: nameserver 10.4.182.20
Aug 20 09:21:57 NTC-6000 user.notice update_resolv.sh: nameserver 10.4.81.103
Aug 20 09:21:58 NTC-6000 user.notice root: SUSBNET usbnet connection up
Aug 20 09:21:58 NTC-6000 user.notice PPPs: rdb_set link.profile.1.interface wwan0
Aug 20 09:21:58 NTC-6000 user.notice PPPs: rdb_set link.profile.1.pid 1909
Aug 20 09:21:58 NTC-6000 user.notice nsupdate.template: on-connection only - no crontime
Aug 20 09:21:58 NTC-6000 user.notice dnsupdate: starting...
Aug 20 09:21:58 NTC-6000 user.notice dnsupdate: nsudpate not enabled
Aug 20 09:21:59 NTC-6000 user.notice IP-UP wwan led: Interface Name: wwan0
Aug 20 09:21:59 NTC-6000 user.notice PPPs: wwan0 UP Mon Aug 20 09:21:59 EST 2012
Aug 20 09:21:59 NTC-6000 user.notice PPPs: Skipping resolv.conf
Aug 20 09:21:59 NTC-6000 user.notice SNAT: Enabled
Aug 20 09:21:59 NTC-6000 daemon.info dnsmasq[942]: reading /etc/resolv.conf
Aug 20 09:21:59 NTC-6000 daemon.info dnsmasq[942]: using nameserver 10.4.81.103#53
Aug 20 09:21:59 NTC-6000 daemon.info dnsmasq[942]: using nameserver 10.4.182.20#53
Aug 20 09:21:59 NTC-6000 user.notice nat.template: started
Aug 20 09:21:59 NTC-6000 user.notice nat.template: configuration
Aug 20 09:21:59 NTC-6000 user.notice nat.template: ======================================================
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.port='8080'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.webenable='0'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.telnetenable='0'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.pingenable='0'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.pad_encode='0'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.open.port=''
Aug 20 09:21:59 NTC-6000 user.notice nat.template: link.profile.0.address='192.168.20.1'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.firewall.enable='1'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: admin.remote.rmthttpport='8080'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: service.firewall.dmz.enable='0'
Aug 20 09:21:59 NTC-6000 user.notice nat.template: iptables -t nat -F nat_dnat
Aug 20 09:21:59 NTC-6000 user.notice nat.template: iptables -F filter
Aug 20 09:21:59 NTC-6000 user.notice 04_default_rte_up: adding default gateway - profile=1,dev=wwan
Aug 20 09:21:59 NTC-6000 user.notice 04_default_rte_up: wwan / setting default gateway
Aug 20 09:21:59 NTC-6000 user.notice 04_default_rte_up: get previous gw
Aug 20 09:21:59 NTC-6000 user.notice 04_default_rte_up: deleting... route del -net default dev wwan0
Aug 20 09:22:00 NTC-6000 user.notice get_wwan_netif.sh: cmd=profile="1";netif="wwan0"
Aug 20 09:22:00 NTC-6000 user.notice 04_default_rte_up: adding... route add -net default gw 10.247.187.41 dev wwan0 metric 20
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: getting the default gateway
Aug 20 09:22:00 NTC-6000 user.notice nat.template: iptables -A filter -p ! icmp -m state --state ESTABLISHED,RELATED -j ACCEPT
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: resolv_if='wwan0'
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: resolv_metric='20'
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: nwinf.wwan0.dns='10.4.182.20 10.4.81.103'
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: nwinf.wwan0.domain=''
Aug 20 09:22:00 NTC-6000 user.notice nat.template: Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: updating /etc/resolv.conf for 'wwan0'
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: new dns - 10.4.182.20
Aug 20 09:22:00 NTC-6000 user.info wwan_monitor: find_interface: wwan_monitor interface:wwan0
Aug 20 09:22:00 NTC-6000 user.info wwan_monitor: update_offset: SessionReceived_Offset=82248  SessionSent_Offset=832
Aug 20 09:22:00 NTC-6000 user.info wwan_monitor: update_offset: SessionReceived_Offset=82248  SessionSent_Offset=832
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: new dns - 10.4.81.103
Aug 20 09:22:00 NTC-6000 user.notice nat.template: iptables -A filter -p tcp -i wwan0 -j DROP
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: #### new resolv.conf
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: nameserver 10.4.182.20
Aug 20 09:22:00 NTC-6000 user.notice update_resolv.sh: nameserver 10.4.81.103
Aug 20 09:22:00 NTC-6000 user.notice 05_rte_up: Rearrage route table for wwan0
Aug 20 09:22:00 NTC-6000 user.notice nat.template: iptables -A filter -p icmp -i wwan0 --icmp-type 8 -j DROP
Aug 20 09:22:00 NTC-6000 user.notice 05_rte_up: Rearrage firewall for wwan0
Aug 20 09:22:00 NTC-6000 user.notice nat.template: iptables -A filter -p tcp -i ra0 -j DROP
Aug 20 09:22:01 NTC-6000 user.notice nat.template: iptables -A filter -p icmp -i ra0 --icmp-type 8 -j DROP
Aug 20 09:22:01 NTC-6000 user.notice root: IF-UP -- set MTU to 1400
Aug 20 09:22:01 NTC-6000 user.notice root: SUSBNET ip-up script called - ipaddr=10.247.187.41,dev=wwan0,profile=1
Aug 20 09:22:01 NTC-6000 user.notice nat.template: ### nat_dnat
Aug 20 09:22:01 NTC-6000 user.notice nat.template: iptables -t nat -v -n -L nat_dnat
Aug 20 09:22:01 NTC-6000 user.notice nat.template: Chain nat_dnat (1 references)
Aug 20 09:22:01 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Aug 20 09:22:01 NTC-6000 user.notice nat.template: ### filter
Aug 20 09:22:01 NTC-6000 user.notice nat.template: iptables -t filter -v -n -L filter
Aug 20 09:22:01 NTC-6000 user.notice nat.template: Chain filter (1 references)
Aug 20 09:22:01 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Aug 20 09:22:01 NTC-6000 user.notice nat.template:     1   196 ACCEPT    !icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
Aug 20 09:22:01 NTC-6000 user.notice nat.template:     0     0 DROP       tcp  --  wwan0  *       0.0.0.0/0            0.0.0.0/0           
Aug 20 09:22:01 NTC-6000 user.notice nat.template:     0     0 DROP       icmp --  wwan0  *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
Aug 20 09:22:01 NTC-6000 user.notice nat.template:     0     0 DROP       tcp  --  ra0    *       0.0.0.0/0            0.0.0.0/0           
Aug 20 09:22:01 NTC-6000 user.notice nat.template:     0     0 DROP       icmp --  ra0    *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
Aug 20 09:22:01 NTC-6000 user.notice nat.template: done
Aug 20 09:22:01 NTC-6000 user.notice dyndns.template: Stopping service ez-ipupdate
Aug 20 09:22:01 NTC-6000 user.notice nat.template: started
Aug 20 09:22:02 NTC-6000 user.notice nat.template: configuration
Aug 20 09:22:02 NTC-6000 user.notice nat.template: ======================================================
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.port='8080'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.webenable='0'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.telnetenable='0'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.pingenable='0'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.pad_encode='0'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.open.port=''
Aug 20 09:22:02 NTC-6000 user.notice nat.template: link.profile.0.address='192.168.20.1'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.firewall.enable='1'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: admin.remote.rmthttpport='8080'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: service.firewall.dmz.enable='0'
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -t nat -F nat_dnat
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -F filter
Aug 20 09:22:02 NTC-6000 user.notice get_wwan_netif.sh: cmd=profile="1";netif="wwan0"
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -A filter -p ! icmp -m state --state ESTABLISHED,RELATED -j ACCEPT
Aug 20 09:22:02 NTC-6000 user.notice nat.template: Using intrapositioned negation (`--option ! this`) is deprecated in favor of extrapositioned (`! --option this`).
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -A filter -p tcp -i wwan0 -j DROP
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -A filter -p icmp -i wwan0 --icmp-type 8 -j DROP
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -A filter -p tcp -i ra0 -j DROP
Aug 20 09:22:02 NTC-6000 user.notice nat.template: iptables -A filter -p icmp -i ra0 --icmp-type 8 -j DROP
Aug 20 09:22:03 NTC-6000 user.notice nat.template: ### nat_dnat
Aug 20 09:22:03 NTC-6000 user.notice nat.template: iptables -t nat -v -n -L nat_dnat
Aug 20 09:22:03 NTC-6000 user.notice nat.template: Chain nat_dnat (1 references)
Aug 20 09:22:03 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Aug 20 09:22:03 NTC-6000 user.notice nat.template: ### filter
Aug 20 09:22:03 NTC-6000 user.notice nat.template: iptables -t filter -v -n -L filter
Aug 20 09:22:03 NTC-6000 user.notice nat.template: Chain filter (1 references)
Aug 20 09:22:03 NTC-6000 user.notice nat.template:  pkts bytes target     prot opt in     out     source               destination         
Aug 20 09:22:03 NTC-6000 user.notice nat.template:     0     0 ACCEPT    !icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
Aug 20 09:22:03 NTC-6000 user.notice nat.template:     0     0 DROP       tcp  --  wwan0  *       0.0.0.0/0            0.0.0.0/0           
Aug 20 09:22:03 NTC-6000 user.notice nat.template:     0     0 DROP       icmp --  wwan0  *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
Aug 20 09:22:03 NTC-6000 user.notice nat.template:     0     0 DROP       tcp  --  ra0    *       0.0.0.0/0            0.0.0.0/0           
Aug 20 09:22:03 NTC-6000 user.notice nat.template:     0     0 DROP       icmp --  ra0    *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
Aug 20 09:22:03 NTC-6000 user.notice nat.template: done
Aug 20 09:22:03 NTC-6000 user.notice ntp.template: started
Aug 20 09:22:03 NTC-6000 user.notice ntp.template: current config / SERVICE_EN=1,NTP_SERVER_ADDR=0.netcomm.pool.ntp.org
Aug 20 09:22:03 NTC-6000 user.notice ntp.template: * */24 * * * /sbin/ntpclient.sh
Aug 20 09:22:03 NTC-6000 user.notice ntp.template: done
Aug 20 09:22:03 NTC-6000 user.notice route.template: routing table before deleting
Aug 20 09:22:03 NTC-6000 user.notice route.template: Kernel IP routing table
Aug 20 09:22:03 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Aug 20 09:22:03 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Aug 20 09:22:03 NTC-6000 user.notice route.template: 0.0.0.0         10.247.187.41   0.0.0.0         UG    20     0        0 wwan0
Aug 20 09:22:03 NTC-6000 user.notice route.template: deleting previous static route table...
Aug 20 09:22:03 NTC-6000 user.notice route.template: truncating previous table...
Aug 20 09:22:03 NTC-6000 user.notice route.template: routing table before adding
Aug 20 09:22:03 NTC-6000 user.notice route.template: Kernel IP routing table
Aug 20 09:22:03 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Aug 20 09:22:03 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Aug 20 09:22:03 NTC-6000 user.notice route.template: 0.0.0.0         10.247.187.41   0.0.0.0         UG    20     0        0 wwan0
Aug 20 09:22:03 NTC-6000 user.notice route.template: adding new static route table...
Aug 20 09:22:03 NTC-6000 user.notice route.template: reading configuration - service.router.static.route.trigger
Aug 20 09:22:03 NTC-6000 user.notice route.template: skipped - trigger
Aug 20 09:22:03 NTC-6000 user.notice route.template: new routing table
Aug 20 09:22:03 NTC-6000 user.notice route.template: Kernel IP routing table
Aug 20 09:22:03 NTC-6000 user.notice route.template: Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
Aug 20 09:22:03 NTC-6000 user.notice route.template: 192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 br0
Aug 20 09:22:03 NTC-6000 user.notice route.template: 0.0.0.0         10.247.187.41   0.0.0.0         UG    20     0        0 wwan0
Aug 20 09:22:06 NTC-6000 user.debug kernel: [  111.610000] wwan0: no IPv6 routers present
Aug 20 09:22:06 NTC-6000 user.info wwan_monitor: find_interface: wwan_monitor interface:wwan0
