First-time Setup Wizard
This Wizard is designed to walk you through the basic information needed to set up your device. It is highly recommended that you use this wizard however if you would like to skip straight to the Basic Interface click on No thanks below. Would you like to use the First Time Setup Wizard?
Step 1 of 5
Select your internet connection type:
WAN type:
Dynamic IP Address
Static IP Address
PPP over Ethernet
PPTP
L2TP
Host Name
(optional)
ISP registered MAC Address
Static IP Address
Static Subnet Mask
Static Gateway
Static Primary DNS
Static Secondary DNS
Username
Password
IP Mode
Dynamic IP Address
Static IP Address
My IP Address
My Subnet Mask
Gateway IP
Server IP Address/Name
PPTP Account
PPTP Password
IP Mode
Dynamic IP Address
Static IP Address
IP Address
Subnet Mask
WAN Gateway IP
Server IP Address/Name
L2TP Account
L2TP Password
Step 2 of 5
WiFi Setup
Your Router has already securely setup with settings that are unique to each individual device.However you can configrue your Router`s setting according to your preference.You can configure SSID(Service Set Identifier) which is the name broadcasted by your Router.SSID Broadcast: if enbaled will broadcast your Router`s SSID to all WiFi enabled devices.Select Disable if you do not want other WiFi enabled devices to see your Router`s SSID.You can disable the WiFi function by selecting off.
Wireless (WiFi)
On
Off
SSID Broadcast
Enable
Disable
SSID Broadcast Name (Max 32 characters)
Step 3 of 5
Router Security
A WiFi Security Key is already set-up with your Router, however you can change that key here if desired. You can also change the security type below. To connect to the Router via WiFi you will need to enter the Security Key into your device.
Security Key Type
WPA-PSK
WPA2-PSK
WPA-PSK / WPA2-PSK
Security Key (Minimum of 8 characters)
WPA Algorithms
TKIP
AES
TKIP / AES
Step 4 of 5
Router Security
In the next pages you will use the quick set-up guide to personalise your Router. Please enter a username and password to be used to gain access to your Router Management Console. It is recommended that you choose a unique password for added security.
Desired Username
Desired Password
Retype Password
Remember to make a note of your username and password
Step 5 of 5
Router Installation is Complete
Please review your settings and click finish.
Your Router will reset and settings will be saved.