First-time Setup Wizard
This Wizard is designed to walk you through the basic information needed to set up your device. It is highly recommended that you use this wizard however if you would like to skip straight to the Basic Interface click on No thanks below. Would you like to use the First Time Setup Wizard?
Step 1 of 5
Select your internet connection type:
WAN Interface:
ADSL
WAN Type:
PPP over Ethernet
PPP over ATM
Username:
Password:
VPI Number:
/ VCI Number:
Enable Automatic 3G backup
Country
Service Provider
Network Name (APN)
Username
Password
Remote Host for keep alive
PIN
Confirm PIN
Step 2 of 5
WiFi Setup
Your router is already setup securely with a password and network name that is unique to every device. However you can choose alternative settings for these features if desired. From this page, you can configure your WiFi network name (SSID), and whether or not this name should be broadcast to all WiFi enabled devices. You can also change the WiFi password or even disable WiFi functionality entirely if desired.
Wireless (WiFi)
On
Off
SSID Broadcast
Enable
Disable
WiFi Network Name(Max 32 characters)
Step 3 of 5
Router Security
A WiFi Security Key is already set-up with your Router, however you can change that key here if desired. You can also change the security type below. To connect to the Router via WiFi you will need to enter the Security Key into your device.
Security Key Type
WPA-PSK
WPA2-PSK
WPA-PSK / WPA2-PSK
Security Key (Minimum of 8 characters)
WPA Algorithms
TKIP
AES
TKIP / AES
Step 4 of 5
Router Security
Please enter a username and password to be used to gain access to your Router Management Console. It is recommended that you choose a unique password for added security.
Desired Username
Desired Password
Retype Password
Remember to make a note of your username and password
Step 5 of 5
Router Installation is Complete
Please review your settings and click finish.
Your Router will reset and settings will be saved.