| System Configuration |
| Configuration Wizard |
This wizard will guide you through basic system setup. |
| System Information |
Configure system and network related parameters: system name, administrator information, SNMP, and time zone.
Clients will be redirected to URL entered in the 'Home Page' field after successful login.
Administrator may limit remote administration access to a specific IP
address or network segments. When enabled, only devices with such IP
address or from this network segment may enter system's administration
web interface remotely.
Network Time Protocol (NTP) Server setting allows the system to synchronize its time/date with external time server. |
| WAN1 Configuration |
Set up WAN1 interface using the connection types: Static, Dynamic, PPTP, or PPPoE. |
| WAN2 Configuration |
Set up WAN2 interface using the connection types: None, Static, Dynamic, or PPPoE. |
| WAN Traffic Settings |
Overall
traffic control features of WAN interface such as Load Balancing, WAN
auto-failover, bandwidth management, and connection detection, etc. |
| LAN Port Mapping |
A
"Service Zone" in the system, by default, contains wired and wireless
coverage areas in the organization. When "Port-Based" mode is enabled,
each physical LAN port can be set individually to map to a specific
Sevice Zone for later use. By contrast, under "Tag-Based" mode, Service
Zones will be distinguished by VLAN tagging, instead of physical LAN
ports. |
| Service Zones |
A table to display the Service Zones and related settings. |
|
System Configuration
