NB16WV-03 - Generic VoIP Setup Guide

Configuring your NB16WV-03 for VOIP Service

The following steps will take you through the process of setting up your VOIP connection.

Step 1: Checking Computer Network Settings:

You will need to connect your computer directly to your VoIP device (modem, or ATA) and set the network connection on your computer to obtain an IP address automatically. Please follow the instructions appropriate for your operating system below:

XP

Below are the instructions for setting Windows XP to obtain an IP address automatically for your ethernet connection:

1. Click on the Start Menu, and go to �Control Panel�.
2. Click on �Network Connections�.
(If you only see "Network and Internet Connections", open that first, and then click on
"Network Connections".)
3. Right click on �Local Area Connection� and select �Properties�.
4. Double-click on �Internet Protocol�.
5. Select "Obtain an IP address automatically", and "Obtain DNS server address automatically".
6. Click �OK�, and then click �OK� (or �Close�).

Vista

Below are the instructions for setting Windows Vista to obtain an IP address automatically for your ethernet connection:

1. Click on the Start Menu, and go to �Control Panel�.
2. Click on �Network and Sharing Centre�.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre"
.)
3. Click on �Manage network connections� (on the left hand side of the window).
4. Right click on �Local Area Connection� and select �Properties�.
5. Double-click on �Internet Protocol Version 4 (TCP/IPv4)�.
6. Select "Obtain an IP address automatically", and "Obtain DNS server address automatically".
7. Click �OK�, and then click �OK� again.

7

Below are the instructions for setting Windows 7 to obtain an IP address automatically for your ethernet connection:

1. Click on the Start Menu, and go to �Control Panel�.
2. Click on �Network and Sharing Centre�.
(If you only see "Network and Internet", open that first, and then click on "Network and
Sharing Centre"
.)
3. Click on �Change adapter settings� (on the left hand side of the window).
4. Right click on �Local Area Connection� and select �Properties�.
5. Double-click on �Internet Protocol Version 4 (TCP/IPv4)�.
6. Select "Obtain an IP address automatically", and "Obtain DNS server address automatically".
7. Click �OK�, and then click �OK� again.

8

Below are the instructions for setting Windows 8 to obtain an IP address automatically for your ethernet connection:

1. In Windows 8 Desktop view, move your cursor to the lower right; select Settings, and then Control Panel.
2. Double-click Network and Sharing Center.
3. From the list of tasks on the left, click Change adapter settings
4. For a wired network connection, right-click Local Area Connection, and select Properties.
5. From the Networking tab, make sure Internet Protocol Version 4 (TCP/IPv4) is checked, and then click Properties.
6. Select "Obtain an IP address automatically", and "Obtain DNS server address automatically".
7. Click �OK�, and then click �OK� again.

OSX

Below are the instructions for setting Mac OS X to obtain an IP address automatically for your ethernet connection:

1. Click on the Apple Menu, and go to "System Preferences".
2. Click on "Network".
3. Click on �Ethernet� or "Built-in Ethernet".
4. Click on the "Configure" drop-down box, and select "Using DHCP" then click
"Apply".

Step 2: Configuring your VOIP settings:

1. Navigate to http://192.168.20.1 in a web browser, using �admin� as both the username and password.

Admin-Admin

2.If you have been asked for First Time Setup Wizard , choose �No Thanks, take me to the Basic Interface.�

No-Thanks-Take-Me-To-The-Basic-Interface

3. From Basic Interface select �Switch to advanced view� from the bottom of the page.

Switch-To-Advanced-View

4. Select the Service Domain option from the VoIP Settings and Configurations menu

Advanced-View-VoIP-Settings-Configurations

5. Please choose the correct PVC setting if you are using the ADSL connection or Mobile Broadband if you are using a 3G/4G Connection.

Advanced-View-VoIP-Settings-Configurations-Service-Domain-Blank

6. Enter the following details as given to you by your VoIP Service Provider.

Advanced-View-VoIP-Settings-Configurations-Service-Domain-Blank-with-Instruction

SIP Setting Details

Display NameVoIP Account Phone Number as provided by your VoIP Service Provider (VSP)
User NameVoIP Account Phone Number as provided by your VoIP Service Provider (VSP)
Register NameVoIP Account Phone Number as provided by your VoIP Service Provider (VSP)
Register PasswordVoIP Account Password as provided by your VoIP Service Provider (VSP)
DomainSIP domain name as per your VoIP Service Provider
Registrar /Proxy ServerSIP Proxy Server as provided by your VoIP Service Provider
Use Outbound ServerEnable or Disable according to your VoIP account type.
Outbound ProxySIP Outbound Domain Server address as provided by your VoIP Service provider

7. After entering all required fields click on the �Save� button.

8. Check the Status at the bottom of the page. The status should change to �Registered� if all the settings entered are correct and you have a current connection to the internet.

Advanced-View-VoIP-Settings-Configurations-Service-Domain-iiNet-Registered
9. Check for a dial tone on your phone handset. The VoIP account should now be active and you should now be able to make and/or receive VoIP phone calls (depending on the type of VoIP account you are using).