NB16WV-03 - Playstation Setup Guide

Playstation Setup

There are two ways of allowing your Playstation to communicate with the internet. One is through port forwarding and the other is through the DMZ feature. Port forwarding will enable specified ports on the router to get access to your Playstation to communicate with the internet as if they were directly connected by allowing access through. Setting your Playstation as a DMZ host opens all the ports on the router to allow access to a designated device.

Before you configure the router, you will need to set a static IP address on your PlayStation. Follow the instructions at the link below to set a static IP address on your Playstation:

http://portforward.com/networking/staticip-ps3-playstation-3.htm

http://portforward.com/networking/static-ip-ps4/

You can use an IP address like 192.168.20.254 for example.

Exclamation-Mark

You can only forward a port to one location (IP address).

In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to use online gaming as same time or make multiple VOIP service connections.

In these cases, you would need to use an alternate port for any subsequent connections after the first device.

Please consult your VOIP provider or game manufacturer for assistance with this.

Setting the Playstation as the DMZ Host

1. Navigate to http://192.168.20.1 in a web browser.

2. Enter admin as both the username and password then click Login.

Admin-Admin

3. If you have been asked for First Time Setup Wizard , choose �No Thanks, take me to the Basic Interface.�

No-Thanks-Take-Me-To-The-Basic-Interface

4. Click on Switch to advanced view option at the bottom right hand side of the screen.

Switch-To-Advanced-View

5. Select the Forwarding Rules menu then click the Miscellaneous option.

Advanced-View-Forwarding-Rules-Port-Forwarding

6. Enter the static IP address of the PlayStation in the DMZ Host IP Address field. In this example, 192.168.20.254 is the IP address of the PlayStation.

Advanced-View-Forwarding-Rules-Miscellaneous-DMZ

7. Click on the Save/Apply button.

8. Reboot the modem. (See the last page of the guide for rebooting instructions)

Adding Port Forwarding Rules for Playstation

1. Navigate to http://192.168.20.1 in a web browser.

2. Enter admin as both the username and password then click Login.

Admin-Admin

3. If you have been asked for First Time Setup Wizard , choose �No Thanks, take me to the Basic Interface.�

No-Thanks-Take-Me-To-The-Basic-Interface

4. Click on Switch to advanced view option at the bottom right hand side of the screen.

Switch-To-Advanced-View

5. Select the Forwarding Rules menu then click the Port Forwarding option.

Advanced-View-Forwarding-Rules-Port-Forwarding1

6. Enter the port number or port range into the Service Port field.

The ports for Playstation are: 80 TCP/UDP, 443 TCP/UDP, 465 TCP/UDP, 983 TCP/UDP, 1935 TCP/UDP, 2053 UDP, 3478-3480 TCP/UDP, 3658 TCP/UDP, 5223 TCP/UDP, 6000-7000 TCP/UDP, 9293 TCP/UDP, 10040-10060 TCP, 10050-10051 TCP, 10070-10080 TCP/UDP, 50000-60000 UDP

7. Enter the IP address of the PlayStation that you wish to port forward to in the Server IP field. In this example, the IP address of the PlayStation is 192.168.20.254

8. Ensure that the box is Ticked (?) in the Enable field.

9. Ensure that the Use Rule# field is set to (0) Always.

10. Click the Save button.

Playstation-Port-Forwarding

11. Reboot the modem. (See the last page of the guide for rebooting instructions)

Rebooting the NB16WV-03

1. In the Advanced View, select the Toolbox menu then click the Reboot option.

Advanced-View-Toolbox-Reboot

2. Click OK when prompted to confirm.

Reboot-Popup-Window