This page allows you to protect your wireless network by specifying
WEP, 802.1x, WPA, or WPA2 wireless security. Before setting up
security, ensure that your wireless adaptors support the same type of
security. Most support WEP, but not all support WPA, WPA2, or 802.1x.
Wi-Fi Protected Setup (WPS): Configure AP
Instead
of configuring wireless security settings manually, you can configure
security settings for wireless main network via the external registrar.
The settings from the external registrar will overwrite existing
settings of wireless main network after you complete WPS setup
procedures.
Personal Information Number (PIN):
Select Wireless Network:
Wireless Security:
Data Encryption:
WPA Pre-Shared Key
Enter the key to be between 8 and 63 ASCII characters, or 64 hexadecimal digits
You can allow those WPS enabled clients to connect to your router securely through the
Add Wireless Client window.
After
enabling security and clicking Apply, you will lose the connection with
your wireless router. You should now set-up security on your wireless
adapters in order to re-establish the connection.