Quick Start

Firmware: 3.103m

Wireless Security

This page allows you to protect your wireless network by specifying WEP, 802.1x, WPA, or WPA2 wireless security. Before setting up security, ensure that your wireless adaptors support the same type of security. Most support WEP, but not all support WPA, WPA2, or 802.1x.

Wi-Fi Protected Setup (WPS): Configure AP

Instead of configuring wireless security settings manually, you can configure security settings for wireless main network via the external registrar. The settings from the external registrar will overwrite existing settings of wireless main network after you complete WPS setup procedures.

Personal Information Number (PIN):

Select Wireless Network:

Wireless Security:

Mixed WPA2-PSK/WPA-PSK

Authentication Type:

Encryption Keys
Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
Format: Hexadecimal digits
(0-9,A-F,and a-f are valid)
ASCII characters
(any printable characters are valid except: & < § , \ )
Key1:
Key2:
Key3:
Key4:
Default Transmission Key:

Wi-Fi Protected Setup (WPS): Add Wireless Client

You can allow those WPS enabled clients to connect to your router securely through the Add Wireless Client window.

After enabling security and clicking Apply, you will lose the connection with your wireless router. You should now set-up security on your wireless adapters in order to re-establish the connection.