Quick Start

 Status Advanced Wireless Management
 

Language:

Basic Settings

Security

       64-Bit WEP

       802.1x

       WPA

       WPA-PSK

       WPA2

       WPA2-PSK

      Mixed WPA2 & WPA

      Mixed WPA2-PSK & WPA-PSK

    

Access Control

Repeater

Quality of Service

 

 

 

Firmware:  3.63u
ADSL2+ :  A2pB023k.d20h

Wireless: 3.131.35.6
Wireless Security

This page allow you to protect your wireless network by specifying WEP, 802.1x, WPA, or WPA2 wireless security. Before setting up security, ensure that your wireless adaptors support the same type of security. Most support WEP, but not all support WPA, WPA2, or 802.1x.

Wireless Security:

Data Encryption:

 WPA Pre-Shared Key

 Enter the key to be between 8 and 63 ASCII characters, or 64 hexadecimal digits

Format: Hexadecimal digits (0-9, A-F, and a-f are valid)
 ASCII characters (any printable characters are valid except: & < , \ )
Pre-Shared Key:
WPA Group Rekey Interval: seconds

After enabling security and clicking Apply, you will lose the connection with your wireless ADSL router. You should now set-up security on your wireless adapters in order to re-establish the connection.