Quick Start

Basic Settings

Security

64-Bit WEP

802.1x

WPA

WPA-PSK

WPA2

WPA2-PSK

Mixed WPA2 & WPA

Mixed WPA2-PSK &WPA-PSK

Access Control

Repeater

Quality of Service

Firmware: 3.63u
ADSL2+ : A2pB023k.d20h

Wireless: 3.131.35.6

Wireless Security

This page allow you to protect your wireless network by specifying WEP, 802.1x, WPA, or WPA2 wireless security. Before setting up security, ensure that your wireless adaptors support the same type of security. Most support WEP, but not all support WPA, WPA2, or 802.1x.

Wireless Security:

Authentication Type:

Encryption Keys
Enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys.
Format: Hexadecimal digits (0-9, A-F, and a-f are valid)
ASCII characters (any printable characters are valid except: & < , \ )
Key1:
Key2:
Key3:
Key4:
Default Transmission Key:

After enabling security and clicking Apply, you will lose the connection with your wireless ADSL router. You should now set-up security on your wireless adapters in order to re-establish the connection.