Local Area Network
IPv4 LAN Auto Configuration
Configure the Broadband Router IP Address and Subnet Mask for LAN interface.
DHCP
Static IP Lease list:
(A maximum 32 entries can be configured)
MAC Address | IP Address | Delete |
---|---|---|
DHCP Static IP Lease
Enter the Mac address and Static IP address then click "Apply/Save".
DHCP Option Setup:
Code (1-254) | Value (255) | Address Pool | Enabled | Delete |
---|---|---|---|---|
DHCP Option Setup
DHCP Option 60 Setup:
Device Class Name | Vendor ID | Vendor ID Match Mode | IP Address Start | IP Address End | Primary DNS | Secondary DNS | Gateway | DHCP Lease Time (seconds) | Enabled | Delete |
---|---|---|---|---|---|---|---|---|---|---|
DHCP Option 60
DHCP Port Setup
Enable or Disable DHCP for every interface.
You must enable lan ports.
IPv6 LAN Auto Configuration
1: Stateful DHCPv6 is supported based on the assumption of prefix length less than 64. Interface ID does NOT support ZERO COMPRESSION "::". Please enter the complete information. For exampe: Please enter "0:0:0:2" instead of "::2".
2: Unique local address must start with "fd". The prefix and the address must be in same network and the prefix lenght must be 64.
VLAN Setup
VLAN ID | Pbits | Delete |
---|