Local Area Network

Local Network

IPv4 LAN Auto Configuration

Configure the Broadband Router IP Address and Subnet Mask for LAN interface.

IP Address:
Subnet Mask:
DHCP:
DHCP Start Range:
DHCP End Range:
Primary DNS Server:
Secondary DNS Server:
DHCP Lease Time (Hour):


LAN to LAN Multicast is enabled until the first WAN service is connected, regardless of this setting.

DHCP Server IP Address

DHCP

Static IP Lease list:

(A maximum 32 entries can be configured)

Description MAC Address IP Address Delete
Add Entries

DHCP Static IP Lease

Enter the Mac address and Static IP address then click "Apply/Save".

Description:
MAC Address:
IP Address:
Close

Edit DHCP Static IP Lease

Enter the Mac address and Static IP address then click "Apply/Save".

Description:
MAC Address:
IP Address:
Close

DHCP Option Setup:

Code (1-254) Value (255) Address Pool Enabled Delete
Add

DHCP Option Setup

State:
Code: (1-254)
Value: (max length:255)
Pool:
Close

DHCP Option Setup

State:
Code: (1-254)
Value: (max length:255)
Pool:
Close

DHCP Option 60 Setup:

Device Class Name Vendor ID Vendor ID Match Mode IP Address Start IP Address End Subnet Mask Primary DNS Secondary DNS Gateway DHCP Lease Time (seconds) Enabled Delete
Add

DHCP Option 60

State:
Device Class Name:
Vendor ID:
Vendor ID Match Mode:
IP Address Start:
IP Address End:
Primary DNS:
Secondary DNS:
Subnet Mask:
Gateway:
DHCP Lease Time(seconds):
Close

DHCP Option 60

State:
Device Class Name:
Vendor ID:
Vendor ID Match Mode:
IP Address Start:
IP Address End:
Primary DNS:
Secondary DNS:
Subnet Mask:
Gateway:
DHCP Lease Time(seconds):
Close

DHCP Port Setup

Enable or Disable DHCP for every interface.

You must enable LAN ports.