QoS Queue Setup

QoS

In ATM mode, a maximum of 16 queues can be configured.

In PTM mode, a maximum of 8 queues can be configured.

For each Ethernet interface, there is a maximum of 4 queues that can be configured.

For each Ethernet WAN interface, there is a maximum of 8 queues that can be configured.

Name Key Interface Qid Prec/Alg/Wght DSL Latency PTM Priority Shaping Rate (bps) Min Bit Rate (bps) Burst Size (bytes) Enable Remove
Default Queue 65 ptm0 1 8/WRR/1 Path0 Low Enable Delete
Default Queue 66 atm0 1 8/WRR/1 Path0 Enable Delete
Add

Add Queue

This screen allows you to configure a QoS queue and assign it to a specific layer2 interface. The scheduler algorithm is defined by the layer2 interface.

Name:
Enable
Interface
Queue Precedence:
  • The precedence list shows the scheduler algorithm configured at each precedence level.
  • Note that precedence level with SP scheduler may have only one queue.
  • precedence level with WRR/WFQ scheduler may have multiple queues.
Scheduler Algorithm:
Queue Weight: [1-63]
Minimum Rate: [1-965 Kbps] (-1 indicates no shaping)
Shaping Rate: [1-965 Kbps] (-1 indicates no shaping)
Shape Burst Size: [bytes] (shall be >=1600)
PTM Priority:
DSL Latency:
Close
View Wlan Queue Setup

QoS Wlan Queue Setup

Note: If WMM function is disabled in Wireless Page, queues related to wireless will not take effects.

Name 55Key Interface Qid Prec/Alg/Wght Enable
WMM Voice Priority 1 wl0 8 1/SP Enabled
WMM Voice Priority 2 wl0 7 2/SP Enabled
WMM Video Priority 3 wl0 6 3/SP Enabled
WMM Video Priority 4 wl0 5 4/SP Enabled
WMM Best Effort 5 wl0 4 5/SP Enabled
WMM Background 6 wl0 3 6/SP Enabled
WMM Background 7 wl0 2 7/SP Enabled
WMM Best Effort 8 wl0 1 8/SP Enabled
WMM Voice Priority 33 wl1 8 1/SP Enabled
WMM Voice Priority 34 wl1 7 2/SP Enabled
WMM Video Priority 35 wl1 6 3/SP Enabled
WMM Video Priority 36 wl1 5 4/SP Enabled
WMM Best Effort 37 wl1 4 5/SP Enabled
WMM Background 38 wl1 3 6/SP Enabled
WMM Background 39 wl1 2 7/SP Enabled
WMM Best Effort 40 wl1 1 8/SP Enabled
Close